Bezzera Mitica with BB005 Grinder Limited Time Offer
Bezzera Mitica adopts the conventional E61 grouphead, which is always revered as the benchmark for commercial quality.
Online video found on Bezzera Mitica
User video found online on Bezzera E61 extraction
The E61 groupheads had been used for decades for commercial usage.
Users can do preinfusion techniques if they find necessary.
The thermosyphon system will cycle hot water to the grouphead just like any E61 system.
Double Pressure Gauge
Features an important brew gauge and a steam boiler gauge, useful for identifying any anomalies during brewing and readiness of the machine.
2 Litres Boiler
A full 2 litres size, to ensure better back to back thermal stability. This is particularly important to a heat exchanger or single boiler.
For the E61 grouphead, if the boiler is lower than 2 litres. It’s found to be considerably unstable in the temperature during extraction. As there’s too much hot water out with fresh cold water pumped in, it will create a drastic drop in temperature in the boiler. Which can also lead to a sharp decline in the grouphead’s temperature from the themosyphon system.
If it’s higher than 2 litres, the start up time will be lengthened, and power consumption will be larger. Thus 2 litres was found by Bezzera to compromise the best at both ends.
The E61 uses a thermosyphon system to stabilise the temperature the grouphead.
A safe material with natural anti-microbial properties to continuously kill greater than 99.9% of bacteria that cause hospital-acquired infections, keeping water in the boiler always potable. One of the most conductive metal on earth, making the machine very efficient in starting up and recovering from lost heat. Will never rust like Stainless Steel, or release lead from Brass, will only oxidise and increase its antimicrobial properties as its age.
It is very easy for anyone to use the E61 system.
Since it is running on a heat exchanger system, users can froth milk and brew coffee at the same time.
The double hole steam wand tip allows the user to froth very quickly.
Being a heat exchanger means that the turnover of water usage is faster, meaning only fresh water will be used for for brewing.
Due to the design of the heat exchanger, minimal cool flushing is required.
The design does not hinder the steam power.
The main difference between a Bezzera Magica and the Bezzera Mitica is how they access the water tank.
The Bezzera Magica’s entire top tray is removable. While the Mitica has a flap for easier access.
The rest are mainly aesthetic difference.
The Bezzera Magica is slightly smaller, while the Mitica has a generous amount of space for cups and drips.
Warning: Be careful of hot surfaces, water and steam at all time.
Do not allow vibration pumps to activate for more than 2 minutes, allow half amount of rest time for any long duration of activation.
|Grouphead..||Commercial Grade E61 Grouphead|
|Boiler Type..||Bezzera’s Improved Heat Exchange System|
|Pump type..||Commercial Grade Vibration Pump|
|Quick Start Up..||No|
|Indicator Lights..||On, off, heating|
|Boiler Capacity..||2.0 Litres|
|Water Tank Capacity..||4.0 Litres|
|Water Tank Access..||Via flapping tray|
|Plumb in connection..||No|
|Pressure Gauge..||Steam & Brew|
|Internal Control..||Internal Pressurestat|
|Chassis Construction..||Stainless steel AISI 304 body|
|Steam/Water Valve Type..||Joy stick|
|Low Water Cut Off..||Yes|
|Low Water Indication..||Light|
|Heat Resistant Wands..||Heat Resistant Grips|
|Number of Portafilter Holders..||2 (Double and Single with baskets)|
|Free Accessories..||Metal Blind Filter, Coffee Powder Scoop and Plastic Tamper.|
|Place of Production..||100% Italy, Milan by Bezzera|
|Place of Assembly..||100% Italy, Milan by Bezzera (By Hand)|
|Dimension (W x D x H)..||320 x 450 x 400 MM|
|Net Weight..||22.7 KG|
|Gross Weight..||25.2 KG|
|Power Supply..||220-230V 50-60 Hz|
|Nominal Power..||1350-1550 W|
Link to official website: Mitica