Cafelat Portafilter Gasket – E61
Recommended to be replaced at least once every year, or when the gasket hardens or cracks.
Made from food-safe silicone, the bright coloured gaskets allow users to easier identify stains and coffee trapped on the gasket.
They are known to last longer and has no odour or smell.
We will not be responsible or able to advise if the Cafelat Portafilter Gasket works with machines not purchased from Fine Coffee Company or our authorised distributor.
Do note that Bezzera/Expobar espresso machines purchased from overseas may be of earlier versions and may not be compatible with the Cafelat Portafilter Gasket.
We are unable to confirm if the gaskets work with 3rd party portafilters and machines from other generic brands. We will not be responsible for any incompatibility.
The following compatibility list only applies to machines distributed by Fine Coffee Company.
- Brewtus Double Boiler with Vibration Pump
- Brewtus Double Boiler with Rotary Pump
- Expobar Office Pulsar
- Expobar Office Control
- Mitica TOP
- Mitica TOP PID
- Magica PID
- Galatea Domus
For other E61 brands or 3rd party portafilters that may require 8.5mm.
FAQ – What will happen if I buy the wrong size?
The thickness of the gasket will determine the “lock-in” position of the portafilter handle. Ideally you want the handle to lock in directly towards you (6 o’clock position). If the gasket is too thin it will lock in too far. If the gasket is too thick it will not lock in enough.
Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the gasket.
We will not be responsible for any damages incurred during the replacement. Gaskets sold are not refundable.
Gaskets sold are not refundable, we are unable to confirm if it works with machines and portafilters from other brands.