Bezzera spare part – Bezzera Vibration pump 230V
$129
Suitable for all Bezzera machines with vibration pump.
In some old machines, food grade sealant or teflon tape should be used instead of O ring.
Note: Always keep the machine unplugged before replacing any components.
Do not overtighten! Brass fitting on the pump may crack if it’s tightened too much!
Clamp part 13 or 7 well while loosening! Else you may dislodge the tube which will be very difficult to reconnect!
Spare parts are new and not provided with any warranty, labour or installation guide.
Delivered in 2-3 working days.
Vibration pumps have a duty cycle of 2/1.
For every 2 minutes of work, it has to rest for a minute to avoid overheating.
TIP:
If you’re renewing your machine and it’s over 3 years old, consider checking and replacing the power relay for the following models at the same time.
Power relay 230V
Bezzera Magica (without PID)*
Bezzera Mitica (without PID and not TOP version)*
Bezzera Strega (Not TOP version)*
Bezzera BZ07 (without PID)^
Bezzera BZ10 (All variants) ^
Bezzera BZ13 (without PID) ^
Bezzera Crema (without PID) ^
* Located under the machine, beside the regulator aka main controller, you will need to unscrew the bottom aluminium cover. A long 3mm hex driver is needed.
^ Located on the side of the machine.