Bezzera BZ09

Bezzera BZ09


An affordable, powerful and fast coffee machines, best for those who drinks solely black.

Out of stock

Bezzera BZ09

Bezzera had identified a few flaws from the traditional systems, particularly from the common E61 grouphead. The most glaring problem? Waiting a long time for your first cup.
Bezzera BZ09 is a single boiler, it can’t brew and steam at the same time and it’s recommended for users who drink mostly in coffee black.



The Bezzera BZ09 is a single boiler espresso machine. The required heat up time is drastically reduced to around 12 to 15 minutes instead of 20 to 30.


Brew Pressure Gauge

Features an important brew gauge, useful for identifying any anomalies during brewing.



It’s a Single Boiler heating system and it’s designed to run at a slightly higher temperature at initiation.
Followed by a steady reduction of temperature to strike an equilibrium in a standard 25-30 seconds extraction.
This expands and fully blossom all the characters in the coffee. At the same time, release aromatic notes only found in lower temperature and reduce the bitterness in coffee.


Copper boiler.

A safe material with natural anti-microbial properties to continuously kill greater than 99.9% of bacteria that cause hospital-acquired infections, keeping water in the boiler always potable. One of the most conductive metal on earth, making the machine very efficient in starting up and recovering from lost heat. Will never rust like Stainless Steel, or release lead from Brass, will only oxidise and increase its antimicrobial properties as its age.



The Bezzera BZ line is known to express brighter notes with greater clarity as compared to standard E61 machines.


Fresher water.

Due to the small boiler, the turnover of water usage is faster, meaning only fresh water will be used for brewing.


Power Saving.

With its fast start up time, it means that coffee can be brewed sooner using less power.


Thermal stability.

Multiple industrial grade heating elements are directly placed within the grouphead to ensure the temperature are maintained within the optimal range.


Faster thermal recovery.

As this is not a thermosyphon system, the drop of temperature in the boiler after extensive use will not drop the temperature at the grouphead. The grouphead’s temperature is maintained by individual heating elements. This allows users to repeat shots back to back more rapidly.



Due to the design of the single boiler, minimal cool flushing is required.
The design does not hinder the steam power.



The Bezzera BZ09 had been redesigned to be almost 20% smaller and lighter compare to an E61 system.
The smaller size makes them easier to transport and has a much smaller footprint.


Easy Portafilter Fastening.

All BZ machines are now provided with a new special gasket for the grouphead, which makes it very comfortable and easy to lock the portafilter.
End users will appreciate this new upgrade on the “BZ” range, you feel the machine more professional when you fit the filter holder compare to any other machines.

User fastening with just a finger strength

User fastening with just a finger strength

No leaks despite not feeling tight from the high quality soft gasket.

No leaks despite not feeling tight from the high quality soft gasket.

Users may feel it’s not tight, at 7 O’clock lock, but they are sealed.


Improved Grouphead Cleaning

E61 removing screen problem animated

E61/Lever shower screen damaged during removal

Some users may find it difficult to remove the shower screen from common groupheads like E61 or levers by prying. Damaging the rims of the screen in the process.

BZ removing screen animated

BZ line shower screen removal

The BZ has an improved design and resolved the problem.

Shower screen condition comparison after 2 years

Shower screen condition comparison after 2 years

BZ Shower screen can remain in pristine condition after removal, saving cost.

BZ Grouphead Cleaning

BZ Grouphead Cleaning

The gasket remains in the grouphead after the shower screen is out. The exposed gasket can be cleaned directly without risk of damaging from removal. Saving time and cost.



As there’re more than one heating element to share the duty of heating.
The main heating element at the boiler, which is a major component is less likely to be overworked and overheated.

BZ groupheads are designed in a way to be easier and less expensive to repair than an E61 machine.



In this version, the Bezzera BZ09 has a manual push button control for activation.
It is a Single Boiler, meaning the user can’t froth and brew at the same time.

To make a milk recipe, the user has to make an espresso first, then switch to steam mode and wait for the machine to produce enough steam for frothing.
Thus, it is recommended for small usage environment, particularly with lower demand for milk recipes




The difference between the Bezzera BZ07, BZ09, BZ10, BZ13 and BZ16?

ModelMaking mostly milk recipes?Has water tank?PlumbablePID temperature controlElectronic Dosage ControlStart up time (Mins)Acelerated recovery timeHeavy duty usage
BZ07 PM PIDYes, a wide range of milk recipesYesNoYesNo15NoNo
BZ07 DE PIDYes, a wide range of milk recipesYesNoYesYes15NoNo
BZ09No, making mostly espressoYesNoNoNo15NoNo
BZ10Yes, a wide range of milk recipesYesNoNoNo15NoNo
BZ13 PMYes, a wide range of milk recipesYesNoNoNo12YesNo
BZ13 DE PIDYes, a wide range of milk recipesYesNoYesYes12YesNo
BZ16 with Vibration pumpYes, a wide range of milk recipesYesNoNoNo18YesNo
BZ16 with Rotary pumpoYes, a wide range of milk recipesNoYesNoNo18YesYes

BZ09 is a single boiler, it cannot froth and brew at the same time, thus it’s for a smaller environment, particularly for coffee black drinkers.

BZ07/BZ10/BZ13/BZ16 are heat exchangers, they can froth and brew at the same time.

BZ16 is suitable for small commercial environment with even better thermal stability and capacity but has a slower start-up time.

Reviews: Rating: 9.4 / 10 Rating: 9.2 / 10 Rating: 9.4 / 10 Rating: 9.2 / 10 Rating: 9.8 / 10 Rating: 9.6 / 10 Rating: 10 / 10 Rating: 9.6 / 10 Rating: 9.8 / 10

Warning: Be careful of hot surfaces, water and steam at all time.
Do not allow vibration pumps to activate for more than 2 minutes, allow half amount of rest time for any long duration of activation.


BZ09 Important instructions (Read first before operating)

To be read with the full instructions given with the machine.

BZ09 instructions



























































Grouphead..Bezzera’s Thermal Efficient 58mm Grouphead
Boiler Type..Bezzera’s Single Boiler System
Pump type..Commercial Grade Vibration Pump
Quick Start Up..Yes
Quick Steam..No
Operation..Manual Push-button
Indicator Lights..On, off, heating
Boiler Capacity..0.5 Litres
Water Tank Capacity..3.0 Litres
Water Tank Access..Via separate flap
Plumb in connection..No
Pressure Gauge..Brew
Internal Control..Internal Pressurestat
Boiler Construction..Copper
Chassis Construction..Stainless steel AISI 304 body
Steam Valve Type..Joy stick with stay open control
Low Water Cut Off..Yes
Low Water Indication..No
Heat Resistant Wands..Heat Proof Grips
Cup Warmer..Yes
Number of Portafilter Holders..1 Double Filter Holder, with both Single and Double Baskets
Free Accessories..Metal Blind Filter, Coffee Powder Scoop and Plastic Tamper.
Place of Production..100% Italy, Milan by Bezzera
Place of Assembly..100% Italy, Milan by Bezzera (By Hand)
Dimension (W x D x H)..250 x 425 x 375 MM
Net Weight..17 KG
Gross Weight..20 KG
Power Supply..220-230V 50-60 Hz
Nominal Power..1450-1750
Warranty..6 months

Link to official website: BZ09

Additional Information

Weight23 kg
Dimensions425 x 250 x 375 cm
There are no products